1. Chlorpromazine Hydrochloride Injection contains sodium metabisulfite and sodium sulfite, sulfites that may cause allergic-type reactions including anaphylactic symptoms and life-threatening or less severe asthmatic episodes in certain susceptible people.

2. Auric Sodium Sulfite Market 2021 :- Auric Sodium Sulfite Market analysis report speaks about the manufacturing process

3. Alcohol sulfite biorefinery process

4. The complexity of the isotopic patterns suggests that a dissimilatory sulfite reductase system may be induced by high concentrations of sulfite.

5. The reaction products:p-benzoquinone and ammonia, respectively, allow a quantitative determination ofp-aminophenol even in the presence of some inorganic reducing materials (sulfides, sulfites, etc.) provided the excess bromine is removed by means of phenol (iodometric method) or sodium sulfite (alkalimetric determination).

6. These substances include cyanides, sulfides, Bisulfides, sulfites, bisulfites, nitrates, and nitrites

7. Sodium Sulfite, Anhydrous Safety Data Sheet according to Federal Register / Vol

8. Question: Sorren offcasts Bepun boilerhouse Mycomycetes ukuleles peculiarness sulfite hool follyproof caging

9. Monosodium salt of sulfurous acid, Sodium acid bisulfite, Sodium Bisulphite, Sodium hydrogen sulfite CAS No

10. Purified liquid protein products having reduced concentrations of salts, sulfites, sulfates and fatty material are also described.

11. Interferences by higher concentrations of halogen ions, sulfide, or sulfite can be eliminated.

12. On the other hand, sulfide was evolved during growth on all concentrations of sulfite tested.

13. Under these conditions, alcoholic fermentation was inhibited by sulfite and to a lesser extent by nitrite.

14. Preferably, the growth hormone is human growth hormone, and the sulfite is sodium sulphite in a concentration of 20 mM.

15. Andfom (Ash Free Andf) To measure Andf, samples are boiled in a neutral detergent solution with amylase and sodium sulfite

16. F5 is a quick starting fermenter with low production of sulfites and can ferment wines up to 14.5% (v/v) alcohol.

17. 3.4.2.5 Scrubbing Blowpit Gases Sulfur dioxide loss from digester Blowpit vents is a major emission source for most sulfite pulp mills

18. It is a weak reducing agent, as is sulfur dioxide, sulfites, and any other compound containing sulfur in the +4 oxidation state.

19. Sulfite at low concentrations (≧ 1 mM caused a cleavage of thiamine in vitro depending upon time, pH value, and temperature.

20. Using different chemicals such as alkali and sulfite, polyphenols with higher yield and satisfactory reactivity towards formaldehyde can be extracted.

21. The primary factor that affects the residual sulfite content appears to be the concentration of sodium bisulfite used as bleaching agent.

22. Sulfite fumes will be given off during the drying process; also, if sodium bisulfite is added to water for steam Blanchings, fumes will escape with the steam.

23. Solid-liquid separation is conducted to recover the mixed slurry of magnesium sulfite and calcium sulfate, and the filtrate is returned to the absorption tower (1) for cycling absorption.

24. Food additive, any of various chemical substances added to foods to produce specific desirable effects. Additives such as salt, spices, and sulfites have been used since ancient times to preserve foods and make them more palatable.

25. Analysis of the steady-state concentrations of intermediates of alcoholic fermentation in intact yeast cells also implies inhibition by sulfite or nitrite of the glyceraldehyde-3-phosphate dehydrogenase step of fermentation.

26. The ability to convert sulfite lye, a by-product from the production of paper and viscose pulp, for the production of ethanol is very valuable, in both economic and environmental terms.

27. The catalyst may be a water soluble inorganic salt having an aggressive anion, such as the halides, sulfites, sulfates and nitrates of alkaline metals and alkaline earth metals, with sodium chloride being preferred.

28. Spent cooking liquors from the sulfite pulp process and Blowpit washwaters averaging 42,000 m /day (11 mgd) are discharged through a \ deepwater outfall (001) jointly with wastewaters from the Weyerhaeuser Company

29. The donor numbers have been determined by calorimetric measurements for the following solvents: acetyl chloride, nitromethane, nitrobenzene, acetic anhydride, benzonitrile, sulfolane, benzylcyanide, ethylene sulfite,i-butyronitrile, propionitrile, ethylene carbonate,n-butyronitrile, tetrahydrofuran, tributyl phosphate, N,N-diethylformamide, N,N-diethylacetamide and hexamethylphosphoramide.

30. Sodium bisulfite (or sodium Bisulphite, sodium hydrogen sulfite) is a chemical mixture with the approximate chemical formula NaHSO 3.Sodium bisulfite in fact is not a real compound, but a mixture of salts that dissolve in water to give solutions composed of sodium and bisulfite ions

31. 11/ 00 Regeneration of pulp liquors 11/ 02 . of sulfite lye 11/ 04 . of alkali lye 11/ 06 . Treatment of pulp gases; Recovery of the heat content of the gases 11/ 08 . . Deodorisation 11/ 10 . Concentrating spent liquor by evaporation (evaporators B 01 D) 11/ 12 . Combustion of pulp liquors 11/ 14 . . Wet combustion